H8WIFI-BT(T3) APP SETTING
Contact Dsoon team directly via firstname.lastname@example.org and we will send you the firmware named "Rom_Code.BIN", which would take two minutes to complete the upgrade.
a) Make sure that the micro SD card and battery are properly installed in the camera. And the switch is in "ON" mode. (If adjust from "TEST" mode to "ON" mode, you need to wait for the end of the 15-second countdown on the screen.)
b) Download the "Trail Cam Pro" APP from App Store or Google Play, or scan the QR code in the user manual.
c) Make sure that the phone’s Bluetooth and WiFi are turned on. (The APP also supports iPads or tablets with Bluetooth and WiFi function.)
d) Open the "Trail Cam Pro" APP and click the "Connect Bluetooth". Select "Bluetooth Open WiFi", and then select the option named "Trail Cam Pro".
e) The camera will display "Turn on WiFi successfully, please connect to the camera". The camera screen will light up and go off immediately. The phone will jump to the Wi-Fi network list. (if there is no automatic jump, you can manually enter the phone Wi-Fi list.)
f)Wait about 20-40 seconds in the WiFi list, the WiFi hotspot named "Trail Cam Pro ******" will appear. Enter the initial password "12345678" to connect to WiFi. (If you can’t see this hotspot, please wait or refresh/restart phone WiFi, or reset trail camera.)
g) After the WiFi connection is successful, you can remotely control it through the APP(distance up to 100ft).
Click the "Menu" button and make a choice of the "FORMAT MEMORY CARD" function